+86-025-83357115

PRODUCTCATALOG

Project

Pharmaceutical

medical devices

SUBSCRIPTIONS

Get mail on new products
Home > Project
GHL High Shear Granulator
Inquire Now
Description

GHL series
High ShearGranulator / Wet Granulator
This machine is designed to achieve excellent mixing and consistent granules at lower operating cost along with higher productivity. Better mixing and closed control of granule size leads to faster tableting speeds with improved quality and least rejections.

1.Machine body  2、Controls  3、Lid opening device  4、Mixing pan  5、Air vent  6、Discharge port
7.Solution feeding port  8、View glass  9、Platform (option)
Key benefits
All contact parts made from Stainless Steel 304/316 (optional); Mirror finish from inside surface; and matt finish from external surface;
Homogeneous binder distribution;
Short batch time and reduced cleaning time;
Maximize CIP effectiveness;
Air purging sealing system for main stirrer shaft and granulator shaft;
PLC based operating panel for precise control of process & automation;
A high-speed granulator is inserted horizontally through wall of bowl to assist blending of powder and to break the product to the granules of required size;
The seal housing and drive shaft may be flushed with cleaning water, which is then drained away from the machine through built in drain tubes;
Granulator motor is provided with a removable stainless steel shroud which covers the motor and simplify cleaning;
All moving parts of the machine are totally enclosed to eliminate accident.
The machine cannot be started unless and until the mixer lid is properly closed;
Flush wall type discharge valve eliminates pockets at the port of discharge valve;
A design in compliance with GMP guideline.
Technical specifications

Model GHL 7/2.5 10 50 100 150 200 250

300

400

600

Volume (max.) Liter 7-2.5 10 50 100 150 200 250 300 400 600
Capacity kg/b 0.3~1 3 15 35 50 60 80 100 135 200
Agitator motor kW 0.75 2.2 4/5.5 6.5/8 6.5/8 11/14 11/14 13/16 18.5/22 22/28
Stirring speed RPM 30-1000 30-600 200/400 200/400 180/270 180/270 180/270 140/220 106/155 80/120
Chopper motor kW 0.75 1.1 1.3/1.8 2.4/3 4.5/5.5 4.5/5.5 4.5/5.5 4.5/5.5 6.5/8 9/11
Chopper speed RPM 300-3000 300-3000 1500/3000 1500/3000 1500/3000 1500/3000 1500/3000 1500/3000 1500/3000 1500/3000
Granulating time min 5-7 5-7 5-7 5-7 5-7 5-7 5-7 5-7 5-7 5-7
Air consumption

m3/h

/

0.1 0.11 0.13 0.2 0.25 0.25 0.3 0.4 0.4
Power supply 3-Phase 380V/50Hz (other on request)
Air working pressure 0.3~0.6 MPa
NOTE: The data above is for reference only and subject to change.

Copyright © 2017 Nanjing Sunrise Technology Co.,Ltd All Right Reserved